phone 07557 363057 email steve@agrohanse.co.uk 
phone 07557 363057 email steve@agrohanse.co.uk
For four decades, German-based CanAGRO GmbH has been a dedicated manufacturer of grain, seed and fertiliser-handling technology and is widely known for it’s superb 
engineering abilities. CanAGRO’s product range has expanded to become the broadest and most comprehensive across the whole of Europe and Russia.
Still a family led company, CanAGRO gets its' drive for excellence and understanding of customer’s needs from it’s own close connections with Agriculture.
Mechanically foldable and manual height-adjustable. The models range from 30 t/h (DF714V) up to 300 t/h (DF1615). This wide range, covers every size of operation from small scale filling of seed drills and fertilizer spreaders up to large scale grain chasing. In a folded position, the DF series is very compact for transport.
Compared to models with reverse folding (GNA/GVA or UHV series), however, it must be mentioned that the initial installation with the DF series is slightly more cumbersome and the switching of trailer to trailer takes a little more time.
With this series, you reach, regardless of the screw length, maximum auger heights (e.g. for loading to trucks during harvest) and essential lateral width (for filling seed drills)
In a folded position, the DF Series are very compact for transport.
combine the advantages of auger and conveyor. They are ideal for transfer of wood chips and sawdust, as well as all combinable crops. A conveyor belt running in a tube combines the benefits of screw conveyor and belt conveyor with a long life and running power due to few mechanical wearing parts. For a conventional belt conveyor, a large number of rollers and ball bearings are used, for a grain screw conveyor the mechanical attrition is greater.
The running powers until the belt is worn out - amount up to 200,000 tonnes.
The belt speed ensures that material is thrown 1-2m beyond the outlet. As such, the height of storage can be greatly increased.
On the basis of the consistently growing material and kit pool of parts of the installation screw and standard auger screw programme, more individual solutions can also be increasingly made.
Started from the various funnel variants, hinge and joint options for flapping, various discharge options with a Y or without, as well as switchable or nor, in steel or stainless steel and in various tube diameters and lengths, a large belt width is possible.
CanAGRO has produced numerous variations of augers for seed drills and fertilizer spreaders over many years.
In 2007, Maschio/ Gaspardo single corn-drilling machines were fitted with purpose-built filling Augers. Lemken drilling machines were also subsequently fitted with filling augers.
Thanks to good cooperation with Väderstad, Pöttinger and Kuhn, further variations have since been added.
Augers are made in standard steel or stainless steel with diameters of 150, 170 and 200 mm and in variable lengths as required.
can be used for many applications, in particular, as a field-side loader in harvest that can be easily transported by tractor or 4x4. CanAGRO is currently developing various design studies for mobile loading units for energy-independent and flexible transfer of bulk goods.
The basic variant here always consists of a fill-in funnel installed on a chassis and an upstream laterally and hydraulically unfoldable and height-adjustable auger screw.
Also, various feed-in funnel designs are available, for instance 6-7 m long feed-in funnels for lateral tilting, as well as models with 2800 mm wide feed-in funnels for straight, reverse starting and tilting of rear and skip trucks.
The drive is powered by PTO of the tractor.
can be used for many applications from Chaff spreading to livestock feeding.
To adjust the output, a hydraulically operated pusher is fitted in front of the cross-screw. The drive of the cross-screw is provided by means of a hydraulic engine, the drive of the auger screw drives through the PTO.
Tube diameter auger screw: 400mm, 500mm
Capacity: up to 300t/h or up to 500t/h
Here, we've given you just a taster of what CanAGRO has to offer you. If you want to see the full product line with all the details, just visit CanAGRO.
Or, why not view all their products in action on the CanAGRO YouTube Channel.
And, of course, you can always talk to me. I'll be happy to answer any questions you might have.
telephone: 07557 363 057 email: info@agrohanse.co.uk
And, of course, I am always available and happy to talk you through anything and everything.
Do get in touch.
Agro Hanse
Pilgrims, Elmstead Road
Elmstead, Colchester, Essex CO7 7AX
United Kingdom
Exclusive UK Trading Partner for
If you want further details on any of the product ranges on our site, do visit our trading partners' sites. Just click on their logos. To see all the CanAGRO ranges, 'in action', head on over to their YouTube channel....
